Chain Link Fence

Home >> Products > Chain Link Fence > Chain Link Fence Machine

Chain Link Fence Machine Introduction

Chain Link Fence Machine Specifications

  1. Width scope of weaving: 1-4 m.
    Wire scope of weaving: 2-4 mm.
    Mesh scope of weaving: 30-100 mm.
    With 3 sets of mesh model at buyer's requirements.
  2. The machine is controlled by PLC automatic controller, so only one person is needed to operate it.
  3. The output per minute: for example: If the mesh is 50 × 50 mm, width: 2 m, the output will be: 1 m2/ min.
  4. Suitable wire to the machine: the tensile scope of the wire 300-500 N/m2.
  5. Use compacting machine to make it into rolls.
  6. Total power of equipment 11kW.
  7. Weight of equipment: 4200 kg.
  8. Outside size: main machine: 6700 × 1430 × 1800 mm.

Chain Link Fence Machine work process

Chain link fence refers to a network of wires, which may be of different thicknesses. For the manufacture of a two chain link wires run in a machine, in which they are wound in turns at regular intervals to a metal rod. Then, this metal rod is pulled out, and one of the two wires is pulled upward, so that the tips of the two wires together and hook into the first row so that the chain-link is formed. Subsequently, again two wires go into the machine and wrap around the already finished mesh. Once the wires are at the end, they are cut off, the mesh is pulled upwards a little and two new wires go into the machine.

Chain Link Fence Machine image
Write Us a Message
skypewhatsapp